Canon GX5070 Online Manual Download Page 225 | Manualshive

Page: 225 / 325

background image

If

icon is displayed:

icon indicates that the wireless router and the printer are not connected. Check the network settings of the

printer. Also, revisit the location of the wireless router and printer at the next check.

For Wired LAN

1. Check the power and LAN cable.

1.

When the printer cannot be found on the setup screen, using LAN connection setup, make sure that
all the network devices are connected to the router and the hub via LAN cables and that all the
devices are turned on.

•

If LAN cable is not connected:

•

Connect the router, hub, computer and printer via LAN cables.

Make sure the printer is turned on.

Make sure the printer, the router and the hub are turned on.

•

If LAN cable is connected, and printer and network device are off:

•

Turn on printer and network device.

•

If LAN cable is connected, and printer and network device are on:

•

Turn them off and on again.

Note

• Some devices require a couple of minutes after being turned on to become ready for use.

•

Wait until all devices are ready before proceeding.

2. Check printer's wired LAN settings.

2.

Make sure

icon is displayed on the LCD when

Setup

button is pressed once or twice.

•

If icon is not displayed:

•

The printer is not set to use wired communication. Enable Wired LAN from the printer settings.

From the

Setup menu

screen, select

Device settings

>

LAN settings

>

Wired LAN

>

Enab./

dis. wired LAN

in this order and select

Enable

.

Check4

Check location of wireless router.

Make sure the printer is not placed too far away from the wireless router.

The printer can be up 50 m (164 ft.) from the wireless router indoors if unobstructed. Make sure the printer is
close enough to the wireless router to be used.

Place the printer and wireless router where there are no obstacles between them. Wireless communication
between different rooms or floors is generally poor. Wireless communication can be impeded by building
materials containing metal or concrete. If the printer cannot communicate with the computer over a Wi-Fi due
to a wall, place the printer and the computer in the same room.

225

«
...
223
224
225
226
227
...
»

Summary of Contents for GX5070






































































































































































































































































































































Reviews:

No comments

Related manuals for GX5070

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 169

Brand: Oki Pages: 118

Brand: Oki Pages: 126

Brand: Xerox Pages: 8

Brand: Oki Pages: 349

4150S - WorkCentre B/W Laser

Brand: Xerox Pages: 4

DiMAGE Scan Elite 5400 II

Brand: Konica Minolta Pages: 38

WorkCentre BookMark 40

Brand: Xerox Pages: 12

Brand: Konica Minolta Pages: 40

Brand: Xerox Pages: 55

Brand: Star Pages: 24

DocuPrint 4050 NPS

Brand: Xerox Pages: 248

Brand: Konica Minolta Pages: 285

Brand: Rice Lake Pages: 86

Brand: SEWOO Pages: 24

Brand: Ouring Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands