Canon GX5070 Online Manual Download Page 156

Page: 156 / 325

LCD and Operation Panel

The standby screen appears when the printer is turned on.

When the

Setup

button is pressed, the display switches to setup menu screen.

Setup

In a menu or settings screen, use the

button to select an item or option, and then press the

button

to proceed with the procedure.

Note

• For details on how to change settings, refer to

Changing Settings from Operation Panel

•

Network Status Indication

Wi-Fi setting and the network status indicate by the icon in the standby screen.

If the

icon appears on the standby screen, it indicates that Wi-Fi is enabled and the printer is

connected to the wireless router.

Depending on the signal state, the icon will change.

Signal strength:

81 % or more

You can use the printer over Wi-Fi without any problems.

Signal strength:

51 % or more

The problem such as the printer cannot print may occur according to the network status. We
recommend placing the printer near the wireless router.

Signal strength:

50 % or less

The problem such as the printer cannot print may occur. Place the printer near the wireless
router.

Wi-Fi is enabled but the printer is not connected to the wireless router.

If the

icon appears on the LCD, it indicates that the wired LAN is enabled.

156

Summary of Contents for GX5070






































































































































































































































































































































Search results

Summary of Contents for GX5070

Reviews:

Related manuals for GX5070

Brands by name

Popular brands

Canon GX5070, Online Manual

Search results

Summary of Contents for GX5070

Reviews:

Related manuals for GX5070

Brands by name

Popular brands