Canon GX3000 Series Online Manual Download Page 392

Page: 392 / 520

Solve Network Troubles with The Printer's Diagnostic
Functions

•

If the printer and wireless router are connected or the printer and computer are connected by

•

USB cable but you cannot print:

Change to Offline (Windows)

•

In other cases than above:

•

Cannot Find Printer on Network/Cannot Print
Cannot Connect to Printer through Wireless Direct

Cannot Find Printer on Network/Cannot Print

Printing Out Network Settings Information:

Follow the procedure below to print out the network settings information.

Step1

Check that printer and wireless router are turned on.

Turn the wireless router back on.

Wait about five minutes and then turn the printer back on.

Step2

Check your devices (e.g. computer/smartphone/tablet) are connected to

Internet.

Make sure that devices and the wireless router are connected to via Wi-Fi, and that the Internet can be used
without problems.

Step3

Make sure the printer's Wi-Fi setting is enabled and the

icon is

displayed.

Step4

Move the printer and device (computer/smartphone/tablet) closer to the wireless

router.

Wireless communication quality deteriorates if the printer or devices are too far from the wireless router.

Step5

Print out network settings information

Print out the network settings information on your printer.

Printing Network Settings

Note

• For troubleshooting IEEE802.1X/EAP (WPA/WPA2/WPA3 Enterprise), refer to the following.

•

Setting Up IEEE802.1X/EAP (WPA/WPA2/WPA3 Enterprise)

392

Summary of Contents for GX3000 Series









































































































































































































































































































































































































































































































































Search results

Summary of Contents for GX3000 Series

Reviews:

Related manuals for GX3000 Series

Brands by name

Popular brands

Canon GX3000 Series, Online Manual

Search results

Summary of Contents for GX3000 Series

Reviews:

Related manuals for GX3000 Series

Brands by name

Popular brands