Canon G4200, Online Manual

Page: 65 / 467

Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
• If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Refill any ink tanks
that are low.
You need to prepare: a single sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Load a single sheet of A4 or Letter-sized plain paper in the rear tray.
After loading paper on the rear tray, the paper information registration screen appears on the LCD.
Select
A4
or
Letter
for
Size:
and
Plain paper
for
Type:
and then press the
OK
button.
3. Pull out the paper output tray, then open the output tray extension.
4. Press the
Setup
button, use the button to select
Maintenance
, and press the
OK
button.
LCD and Operation Panel
5. Use the button to select
Nozzle check
and then press the
OK
button.
The nozzle check pattern will be printed.
6. Examine the nozzle check pattern .
65