Canon G3620 Online Manual Download Page 43

Page: 43 / 335

Connecting with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.

• Wireless connection (connecting devices via a wireless router)

• Direct wireless connection (connecting devices directly without a wireless router)

This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.

Follow the procedure below to set up and use Wireless Direct.

1. Preparing the printer.

Changing Printer Setting to Use Wireless Direct

2. Preparing a device to connect to the printer.

Connecting a smartphone/tablet/computer to the printer

Important

• You can connect up to 5 devices to the printer at the same time with Wireless Direct.

• Check the usage restrictions and switch the printer to the Wireless Direct.

Restrictions

Changing Printer Setting to Use Wireless Direct

Make sure the printer is turned on.

Press

Setup

button.

The

Setup menu

screen appears.

Select

Device settings

and press the

button.

Select

LAN settings

and press the

button.

Select

Wireless Direct

and press the

button.

Select

Switch WL Direct

and press the

button.

Check displayed message, select

Yes

and press the

button.

Select

Done

and press the

button.

The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

Summary of Contents for G3620
















































































































































































































































































































































Search results

Summary of Contents for G3620

Reviews:

Related manuals for G3620

Brands by name

Popular brands

Canon G3620, Online Manual

Search results

Summary of Contents for G3620

Reviews:

Related manuals for G3620

Brands by name

Popular brands