Canon Finisher-Q1, Service Manual

Page: 40 / 64

Chapter 3
3-6
F-3-18
2) Remove the wiring harness from the guide [1],
disconnect the connector [2], and then remove the
photosensor PCB [3].
F-3-19
3.3.1.4 Removing the
Photosensor PCB
0008-4591
1) Remove the screw [1] to detach the PCB cover [2].
F-3-20
2) Remove the wiring harness from the guide [1],
disconnect the connector [2], and then remove the
photosensor PCB [3].
F-3-21
3.3.2 Scrap Full Detector PCB
3.3.2.1 Removing the scrap full
detector PCB
0008-1864
1) Remove the insulation sheet[1].
F-3-22
[1]
[2]
[1]
[3]
[2]
[1]
[2]
[1]
[3]
[2]
[1]