Canon Finisher-AK1, Service Manual

Page: 123 / 374

4
4
4-65
4-65
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the paddle > Procedure
Parts Replacing and Cleaning > Intermediate Process Tray Assembly > Removing the paddle > Procedure
Removing the Paddle Unit
■ Preparation
1) Remove the Stack Wall (Lower).(Refer to page 4-29)
2) Remove the Stack Wall (Upper).(Refer to page 4-27)
3) Remove the Neat Stack Unit (Lower).(Refer to page 4-59)
4) Remove the Process Tray Unit.(Refer to page 4-62)
■
Procedure
1) Turn the Paddle Shaft [1] until it can be accessed to the screw, and remove the 2 Paddle
Units [2].
• 3 Screws [3]
[3]
[3]
[1]
[2]
x2
F-4-151
Removing the paddle
■ Preparation
1) Remove the Stack Wall (Lower).(Refer to page 4-29)
2) Remove the Stack Wall (Upper).(Refer to page 4-27)
3) Remove the Neat Stack Unit (Lower).(Refer to page 4-59)
4) Remove the Process Tray Unit.(Refer to page 4-62)
5) Remove the Paddle Unit.(Refer to page 4-65)
■ Procedure
1) Release the 2 claws [1] to remove the Paddle Retainer Block [2], and remove the paddle [3].
[2]
[3]
[1]
[1]
F-4-152