1
2
3
4
2-36
Finishing Tab
Specifies the finishing settings for the printed pages including
the collating and binding.
For information on [Profile] and [Output Method], refer to
“Profiles,” on p. 2-41.
Gutter Settings
Clicking [Gutter] in the [Finishing] tab sheets opens the [Gutter
Settings] dialog box.
Preview image
Displays the image with the currently
selected settings reflected. For details on
preview image, see page 2-41.
[Binding Location] Selects a binding location for the printed
pages.
[Gutter]
Click this button to set the gutter width for
binding a printed document (see p. 2-36).
[Finishing]
Select the Collate option to print a document
in correct binding order. For example, when
printing multiple copies of a 3-page
document, the print order is 1, 2, 3, 1, 2, 3,
and so on. ([Off] or [Collate]).
NOTE
If you select [Collate] in [Finishing], the image on the left bottom
of the preview image will change.
[Restore Defaults] Resets all the current settings to their default
values.
[View Settings]
Click this button to display the [View
Settings] dialog box. This dialog box allows
you to view and confirm all of the current
page settings in a listed form (see p. 2-44).
[Gutter]
Specifies the gutter width in a range
between 0.0 and 1.2 in. (0 and 30 mm).