28
To edit the stored data, input the new value during the
display of that data value (x) after pressing or key, and
then press to confirm the edit. But, if you press
instead of , a new data value will be stored.
Press can delete the data during the display of that
data value (x) after or key is pressed; and the
sequence of the data which following the deleted data will
be shifted up automatically.
Press or key to exit the data value and frequency
display, then you can perform other calculation operations.
Input data are stored in calculation memory. As the
memory full, [Data Full] will be displayed and you cannot
input or perform any calculation. Press , or key
will display the options [EditOFF] or [ESC].
After changing into another mode or regression type (Lin,
Log, Exp, Pwr, Inv, Quad), input data will be cleared.
After finishing data entries, you can recall or calculate the
statistical values.
Edit OFF
(Press ) :
ESC
(Press ) :
Keep on inputting data without storing into the
memory, and you are not able to display or
edit any of the data you had input.
Just exit data input without registering the data
into the memory.
