Canon EOS RP Page 429 Instruction Manual Download

Page: 429 / 841

221

Flash Photography

Canon Speedlites Other Than the EL/EX-Series

With an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL

autoflash mode, the flash can be fired at full output only.

Set the camera’s shooting mode to <

> manual exposure or <

aperture-priority AE and adjust the aperture setting before shooting.

When using a Speedlite that has manual flash mode, shoot in the manual

flash mode.

Non-Canon Flash Units

Sync Speed

The camera can synchronize with non-Canon compact flash units at up to

1/180 sec. With large studio flash units, the flash duration is longer than

that of a compact flash unit and varies depending on the model. Before

shooting, confirm that flash is synced correctly at approx. 1/60–1/30 sec.

If the camera is used with a flash unit or flash accessory dedicated to another

camera brand, the camera not only may not operate properly, but malfunction

may result.

Do not attach a high-voltage flash unit to the camera’s hot shoe. It may not be

fired.

Summary of Contents for EOS RP










































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS RP

Reviews:

Related manuals for EOS RP

Brands by name

Popular brands

Canon EOS RP, Instruction Manual

Search results

Summary of Contents for EOS RP

Reviews:

Related manuals for EOS RP

Brands by name

Popular brands