Canon EOS REBEL T7I, Basic Instruction Manual

Page: 69 / 676

67
A
Fully Automatic Shooting (Scene Intelligent Auto)
4
Take the picture.

Press the shutter button completely to
take the picture.
 The captured image will be displayed
for approx. 2 sec. on the LCD
monitor.

When you finish shooting, push down
the built-in flash with your fingers.

The focus indicator <
o
> blinks and focus is not achieved.
• Aim the Area AF frame over an area with good contrast, then press
the shutter button halfway (p.45).
• If you are too close to the subject, move away and shoot again.
• Change the AF area selection mode and shoot again (p.96). The
default setting is Automatic selection AF.

When focus is achieved, the AF points do not light up in red.
The AF points light up in red only when focus is achieved in low light
or with a dark subject.

Multiple AF points light up simultaneously.
Focus has been achieved at all those points. You can take the
picture as long as an AF point covering the target subject is lighting
up.
FAQ
The <
A
> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If you do not obtain the desired color tones, change the
mode to a Creative Zone mode and select a Picture Style other than
<
D
>, then shoot again (p.109).