manualshive.com logo in svg

Canon EOS Rebel T6 W, Instruction Manual

Share
Download
Canon EOS Rebel T6 W Instruction Manual Download Page 91

91

Responding to Error Messages

In the case of [

q

], is Camera Connect running?

Establish a connection using Camera Connect (p.25, 51).

Are the camera and the access point set to use the same 
encryption key for authentication?

This error occurs if the encryption keys do not match when the 
authentication method for encryption is set to [

Open system

]. 

The setting is case-sensitive, so check upper- and lower-case 
characters. Make sure that the correct encryption key for 
authentication is entered on the camera (p.50, 73).

Is the power of the target device and access point on?

Turn on the target device and access point, then wait a while. If a 
connection still cannot be established, perform the procedures to 
establish the connection again.

11:  Connection target not found

12:  Connection target not found

Summary of Contents for EOS Rebel T6 W



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands