Canon EOS REBEL K2 3000V DATE Instructions Manual Download Page 39

Page: 39 / 48

Auto Exposure Bracketing (AEB)

With AEB, the camera automatically changes the exposure within the set
range (up to +/–2 stops in 1/2-stop increments) for three successive frames.

Move the <

> arrow to the

> icon.

•

Look at the LCD panel and press
the <

> button. (

∫

)

Set the desired AEB amount.

•

Turn the <

> dial.

•

Press the shutter button halfway to
return to normal camera operation.

AEB amount

AEB range

Take the picture.

The three bracketed shots will be
exposed in the following sequence:
standard exposure, decreased
exposure, and increased exposure.

As shown on the left, the respective
bracketing amount will be displayed
as each bracketed shot is taken.

•

The picture will be taken in the
current film advance mode.

•

After the three AEB shots are
taken, the AEB will not be canceled
automatically. To cancel AEB, set
the AEB amount back to “

”.

• During AEB shooting, the <

> arrow will appear next to the

> icon and the AEB level <

•

> will be displayed. In the

viewfinder, the <

> icon will blink.

• In the <

> film advance mode, the camera stops shooting

automatically after taking the three AEB shots. In the <

> (single

frame) mode, press the shutter button completely three times to
take the three AEB shots.

• If you use the self-timer or remote control, the three AEB shots

will be taken continuously automatically.

• AEB can be combined with exposure compensation.
• AEB cannot be used with flash or bulb exposures.

standard exposure

decreased exposure

increased exposure

Summary of Contents for EOS REBEL K2 3000V DATE

















































Search results

Summary of Contents for EOS REBEL K2 3000V DATE

Reviews:

Related manuals for EOS REBEL K2 3000V DATE

Brands by name

Popular brands

Canon EOS REBEL K2 3000V DATE, Instructions Manual

Search results

Summary of Contents for EOS REBEL K2 3000V DATE

Reviews:

Related manuals for EOS REBEL K2 3000V DATE

Brands by name

Popular brands