Canon EOS C700, Instruction Manual

Page: 165 / 250

165
Checking the Network’s Status and Settings
Checking the Network’s Status and Settings
After activating a network function, the camera will connect to the network that was configured in advance. The
icons displayed on the control display and at the top left of the monitoring screen will indicate the type of network
selected and the connection status.
Wi-Fi (Infrastructure): In yellow – the camera is connecting to or disconnecting from the network. In white –
the network function can be used.
Wi-Fi (Camera Access Point): In yellow – starting the camera’s access point. In white – the camera’s access
point is ready. Connect the Wi-Fi enabled device to the camera.
Ethernet: In yellow – the camera is connecting to or disconnecting from the network. In white – the
network function can be used.
The (Ethernet) indicator next to the terminal will flash or illuminate as follows*: Flashing in
green – connecting to the network or streaming video (IP streaming only); illuminated in green –
Browser Remote or FTP transfer active; flashing in red – network error.
: Browser Remote (
A
166)
: IP streaming (
A
178)
* You can also set [System Setup]
>
[LED]
>
[LAN (Ethernet)] to [Off] to disable the indicator.
Checking and Changing Network Settings
The camera’s network functions are optimized to work automatically with minimal setup by the user. Still, you
have the option to change manually more advanced network settings to suit specific needs. Changing settings
manually requires more advanced knowledge of Wi-Fi and network settings.
1 Review the network settings of the desired function.
Setup screen: [NETWORK]
>
Desired function*
>
[OPTIONS]
Monitoring menu: [System Setup] (
B
)
>
[Network Settings]
>
Desired function**
* The camera will switch automatically to playback mode when you select [FTP Transfer].
** [FTP Transfer] from the playback screen only.
• The submenu that opens will list all the network settings relevant to the selected network function. Turn the
SELECT dial to scroll and review all the information.
• Monitoring menu only: You can select [Display Info] and press SET to view a summary of all the network
settings (except for FTP transfer). Push the joystick up/down to view other pages or press SET to return to
the previous submenu.
2 Select the network setting you wish to change and press SET.
3 Select an option and press SET or enter the required text/numbers using the keyboard screen
(
A
37).