Canon EOS C70, Instruction Manual

Page: 173 / 215

173
Di s playing the S tatu s S creen s
Di s playing the Statu s Screen s
You can use the status screens to check the camera’s various settings. You can also output the status screens
to an external monitor.
1 S et an a ss ignable button to [ S tatu s ] (
A
105).
2 Pre ss the a ss ignable button to open the s tatu s s creen s .
• The status screen most recently displayed will appear unless you turned off the camera or changed the
operating mode.
• You can also press the AUDIO STATUS button to open directly only the [
¡
Audio Setup] status screen.
3 S croll through the s tatu s s creen s to chec k the de s ired s etting s .
• Bring the cursor to a page number and push the joystick left/right to move between the status screens.
• You can also use front/rear control dials and the SELECT dial to navigate the status screens in the same way
as the setup menus.
4 Pre ss the a ss ignable button again or s elect [
X
CLO S E] to clo s e the s tatu s s creen s .
• You can also press the MENU button to close the status screens and open the menu instead.
To sk ip directly to the page of a s pecific s tatu s s creen:
[ Gamma/Color S pace/Range] s tatu s s creen s (CAMERA mode only)
[ Gamma/Color Space/Range] (
A
173)
[
/
] (custom picture file in use) (
A
174)
[
v
Camera Setup] (
A
175)
[ Assignable Buttons] (
A
176)
[
¡
Audio Setup] (
A
177)
[
B
System Setup] (
A
178)
[
Æ
Recording/Media Setup] (
A
179)
[ Network Settings] (
A
180)
1
3
2
5
4
1 Gamma curve, color space (
A
113) and range
used for clips recorded on the cards
2 Look File applied (
A
111)
3 Gain for HDR-to-SDR conversion (
A
132)
4 HLG color quality (
A
113)
5 Gamma curve, color space (
A
113, 131) and
range (
A
130) used for video outputs/monitoring
devices
[HDMI]: Video output from the HDMI OUT
terminal
[LCD]: LCD screen
[IP Strm. (8 bit)]: IP streaming signal (
A
154)