Canon EOS C300 Mark II, Instruction Manual

Page: 29 / 223

29
Attaching and Removing the Monitor Unit
Attaching and Removing the Monitor Unit
You can attach the monitor unit to the accessory shoe on the camera or to one of those on the handle unit.
Further ahead you will find details about using the LCD panel and adjusting the LCD screen (
A
40, 41).
Attaching the Monitor Unit
1 Set the
Q
switch to OFF.
2 Insert the attachment base of the monitor unit to the
camera’s accessory shoe or to one of the handle
unit’s accessory shoes.
• You can use the attachment base at the back of the
monitor unit to attach it to the accessory shoe on the
front of the handle unit.
3 Tighten the monitor unit’s lock screw.
4 Using the two supplied unit cables, connect the
camera’s AUDIO terminal to the monitor unit’s
AUDIO terminal and the camera’s VIDEO terminal to
the monitor unit’s VIDEO terminal.
• Align the
Í
marks on cables’ plugs and terminals.
• The unit cables are interchangeable and either can be
used to connect the AUDIO or VIDEO terminals. You
can use the two pairs of supplied rubber O-rings to
color-code the cables for easy identification.
Removing the Monitor Unit
1 Set the
Q
switch to OFF.
2 Disconnect the two unit cables from the camera’s and
monitor unit’s AUDIO and VIDEO terminals.
• Pull back the metallic tip of the plug and then disconnect the
cable from the terminal.
3 Unscrew the lock screw and then gently slide out the monitor
unit from the accessory shoe.
IMPORTANT
• Be careful not to drop the camera when attaching or removing the monitor unit.
햳
햴
햵
햵
Rubber O-rings (colored)