Canon EOS 77D Instruction Manual Download Page 276

Page: 276 / 502

276

Connecting the camera to a TV set is recommended to play back the
shot movies (p.369-3 71).

When the shooting mode is set to any mode other than <

autoexposure control will take effect to suit the scene’s current brightness.

Set the power switch to <



The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Set the Mode Dial to a mode other
than <

>, <

>, or <

Focus on the subject.



Before shooting a movie, focus with
AF or manual focus (p.259-268, 271).



By default, [

Movie Servo AF:

Enable

] is set so that the camera

always keeps focusing. To stop Movie
Servo AF, see page 315.

Shoot the movie.



Press the <

> button to start

shooting a movie. To stop movie
shooting, press the <

> button

again.



While the movie is being shot, the
“

” mark will be displayed on the

upper right of the screen.



Sound will be recorded by the built-in
microphones.

Shooting Movies

Autoexposure Shooting

Recording movie

Built-in microphones

Summary of Contents for EOS 77D























































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 77D

Reviews:

Related manuals for EOS 77D

Brands by name

Popular brands

Canon EOS 77D, Instruction Manual

Search results

Summary of Contents for EOS 77D

Reviews:

Related manuals for EOS 77D

Brands by name

Popular brands