Canon EOS 760DW Instruction Manual Download

Page: 3 / 430

Before starting, check that all the following items are included with your
camera. If anything is missing, contact your dealer.

* Battery Charger LC-E17 or LC-E17E is provided. (The LC-E17E comes with a

power cord.)

The Instruction Manuals and DVD/CD-ROMs provided are listed on the next
page.

If you purchased a Lens Kit, check that the lenses are included.

Depending on the Lens Kit type, lens instruction manuals may also be
included.

Be careful not to lose any of the above items.

Item Check List

Battery Pack

LP-E17

(with protective cover)

Battery Charger

LC-E17/LC-E17E*

Wide Strap

Camera

(with eyecup and body cap)

Interface Cable

Summary of Contents for EOS 760DW















































































































































































































































































































































































































































Search results

Summary of Contents for EOS 760DW

Reviews:

Related manuals for EOS 760DW

Brands by name

Popular brands

Canon EOS 760DW, Instruction Manual

Search results

Summary of Contents for EOS 760DW

Reviews:

Related manuals for EOS 760DW

Brands by name

Popular brands