manualshive.com logo in svg

Canon EOS 6D, Instruction Manual

Share
Download
Canon EOS 6D Instruction Manual Download Page 264

Viewing the Images on TV

264

1

Connect the provided AV cable to 
the camera.

With the plug’s <

Canon

> logo facing 

the back of the camera, insert it into 
the <

q

> terminal.

2

Connect the AV cable to the TV 
set.

Connect the AV cable to the TV’s 
video IN terminal and audio IN 
terminal.

3

Turn on the TV and switch the 
TV’s video input to select the 
connected port.

4

Set the camera’s power switch to 
<

1

>.

5

Press the <

x

> button.

X

The image will appear on the TV 
screen. (Nothing will be displayed on 
the camera’s LCD monitor.)

To play back movies, see page 253.

Viewing on Non-HD TV Sets (Connected with AV Cable)

AUDIO

VIDEO

(Red)

(White)

(Yellow)

Do not use any AV cable other than the one provided. Images may not 
be displayed if you use a different cable.

If the video system format does not match the TV’s, the images will not 
be displayed properly. If this happens, switch to the proper video system 
format with [

5

3: Video system

].

Summary of Contents for EOS 6D























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands