Canon EOS 6D Page 253 Instruction Manual Download

Page: 253 / 406

253

Play back the image.



Press the <

> button to display

images.

Select a movie.



Turn the <

> dial to select the

movie to be played.



On the single-image display, the
<

> icon displayed on the upper left

indicates a movie. If the movie is a video
snapshot, <

> will be displayed.



You can press the <

> button to

switch to the shooting information
display (p.238).



In the index display, perforations at the
left edge of a thumbnail indicate a
movie.

As movies cannot be played

on the index display, press <

> to

switch to the single-image display.

In the single-image display, press <

The movie playback panel will appear
at the bottom of the screen.

Play back the movie.



Select [

] (Play), then press <

The movie will start playing.



You can pause the movie playback by
pressing <



You can adjust the sound volume by
turning the <

> dial even during

movie playback.



For more details on the playback
procedure, see the next page.

Playing Movies

Speaker

The camera might not be able to play movies shot by another camera.

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands