Canon EOS 6D Page 221 Instruction Manual Download

Page: 221 / 406

221

Setting the Time Code

You can select what to display on the movie playback screen.
[

Rec time

] : Displays the recording time and playback time during

movie playback.

[

Time code

] : Displays the time code during movie playback.

Movie Playback Count



Shooting still photos during movie shooting will cause a discrepancy
between the actual time and time code.



If [

Free run

] is set and you change the time, zone, or daylight saving

time (p.36), the time code will be affected.



The time code is not recorded for video snapshots.

Regardless of the [

Movie rec count

] setting, the time code will always be

recorded to the movie file.

During movie shooting

During movie playback

With [Time code] set:



If you change the setting for either [

Movie play count

] in [

2: Time

code

] or for [

3: Movie play count

], the other setting will also change

automatically.



“Frames” are not displayed during movie shooting and movie playback.

Summary of Contents for EOS 6D























































































































































































































































































































































































































Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands

Canon EOS 6D, Instruction Manual

Search results

Summary of Contents for EOS 6D

Reviews:

Related manuals for EOS 6D

Brands by name

Popular brands