Canon EOS 5DS Instruction Manual Download Page 344

Page: 344 / 534

344

Play back the image.

Press the <

> button to display an

image.

Select a movie.

Turn the <

> dial to select the

movie to be played.

With the single-image display, the
<

> icon displayed on the

upper left indicates a movie.

In the index display, perforations at the
left edge of a thumbnail indicate a
movie.

As movies cannot be played

from the index display, press <

to switch to the single-image
display.

In the single-image display, press
<

The movie playback panel will appear
at the bottom of the screen.

Play back the movie.

Select [

] (Play), then press <

The movie will start playing back.

You can pause the movie playback
by pressing <

You can adjust the sound volume
during movie playback by turning the
<

> dial.

For more details on the playback
procedure, see the next page.

Playing Back Movies

Speaker

The camera may not be able to play back movies shot with another camera.

Summary of Contents for EOS 5DS























































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 5DS

Reviews:

Related manuals for EOS 5DS

Brands by name

Popular brands

Canon EOS 5DS, Instruction Manual

Search results

Summary of Contents for EOS 5DS

Reviews:

Related manuals for EOS 5DS

Brands by name

Popular brands