Canon EOS 5D Mark III Page 207 Instruction Manual Download

Page: 207 / 404

207

The AF modes available are [

Live mode

], [

Live mode

] (face

detection, p.208), and [

Quick mode

] (p.212).

If you want to achieve precise focus, set the lens focus mode switch to
<

>, magnify the image, and focus manually (p.214).

Select the AF mode.

Under the [

] tab, select [

mode

]. In the <

> mode, it is

displayed under [

While the Live View image is
displayed, you can press the
<

> button to select the AF

mode on the setting screen displayed.

The image sensor is used to focus. Although AF is possible with the
Live View image displayed,

the AF operation will take longer than

with the Quick mode.

Also, achieving focus may be more difficult than

with the Quick mode.

Display the Live View image.

Press the <

> button.

The Live View image will appear on
the LCD monitor.

The AF point < > will appear.

Move the AF point.

You can use <

> to move the AF

point to where you want to focus. (It
cannot go to the edges of the picture.)

Pressing <

> straight down will

return the AF point to the image
center.

Using AF to Focus

Selecting the AF Mode

Live Mode:

AF point

COP

Summary of Contents for EOS 5D Mark III





















































































































































































































































































































































































































Search results

Summary of Contents for EOS 5D Mark III

Reviews:

Related manuals for EOS 5D Mark III

Brands by name

Popular brands

Canon EOS 5D Mark III, Instruction Manual

Search results

Summary of Contents for EOS 5D Mark III

Reviews:

Related manuals for EOS 5D Mark III

Brands by name

Popular brands