Canon EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR..., Service Manual

Page: 28 / 285

General Information
23
⑷ With C.Fn-13-1, the Multi-controller can select the AF point
directly. With C.Fn-13-2, the Quick Control Dial can select
the AF point directly (without needing to press the AF point
selector).
7-6 AF point display:
Indicated by superimposed display in the viewfinder and on
the LCD panel.
7-7 AF activation: AF is activated by pressing the shutter button halfway (SW-1)
7-8 AF operation speed: Same as the EOS 20D.
7-9 Focus confirmation:
Indicated by superimposed display in viewfinder (can be
disabled with Custom Function), focus confirmation light, and
beeper (can be disabled with the power switch).
⑴ When the AI Focus AF mode's AI SERVO AF is set, the beeper
sounds.
⑵ In the AI SERVO AF mode, the beeper does not sound.
⑶ No focus confirmation indicator in the AI SERVO AF mode.
⑷ The focus confirmation beeper can be enabled or disabled
with the menu's [Beep].
⑸ The superimposed display can be enabled/disabled with
C.Fn-10.
7-10 AF precision: Same as the EOS 20D
7-11 AF working range: EV -0.5 -18 (at 20ºC and ISO 100, under Canon's testing
standards)
7-12 AF-assist beam:
When an EOS-dedicated Speedlite is used (equipped with
AF-assist beam) and turned on, a near-infrared beam (peak
wavelength approx. 700 nm) is emitted automatically.
8．Exposure Control
8-1 Type:
Max. aperture TTL metering with 35-zone SPC with the
following selectable modes:
⑴ Evaluative metering (linked to all AF points)
⑵ Partial metering (approx. 8% of viewfinder)
⑶ Spot metering (approx. 3.5% of viewfinder)
・ During continuous shooting, spot metering is repeated for
each shot.
⑷ Centerweighted average metering
・ In the Full Auto mode, evaluative metering is set
automatically.
・ AF point-linked partial metering and spot metering are not
possible.
8-2 Exposure modes: 1) Program AE (shiftable)
2) Shutter-priority AE
・ With C.Fn-16-1, safety shift is applied to 1) or 2).
3) Aperture-priority AE
4) Full Auto (non-shiftable)
5) E-TTL II autoflash program AE
・ C.Fn-14-0: Evaluative metering, C.Fn-14-1: Averaged
metering
6) Manual exposure (including bulb)