Canon EOS 300V Instructions Manual Download Page 30

Page: 30 / 60

Imprinting the Date or Time

(DATE Model only)

Setting the Date and Time

Move the <

> arrow to <

•

Look at the LCD panel and press the
<

> button.

If the date and time has not been set,
“

” will blink on the LCD panel.

Select the digit to be set.

•

Press the <

> button.

•

The digit selection will change in the
following sequence: year, month, day,
hour, minute, “ ”.

Set the correct number.

•

Turn the <

> dial.

•

Repeat steps

and

until all the

date and time digits are set correctly.

Finalize the date and time setting.

•

Keep pressing the <

> button until

no digits are blinking.

•

If you press the <

> button while

“ ” is blinking, 0 sec. will be set.

The date and time setting can be retained for about 10 min. after the cam-
era’s batteries are removed.

If a picture is taken while the date and time are blinking, the date and time will not
be imprinted on that picture.

NNN E SEC2 (21-30) 02.5.11 11:15 AM Page 30

Summary of Contents for EOS 300V





























































Search results

Summary of Contents for EOS 300V

Reviews:

Related manuals for EOS 300V

Brands by name

Popular brands

Canon EOS 300V, Instructions Manual

Search results

Summary of Contents for EOS 300V

Reviews:

Related manuals for EOS 300V

Brands by name

Popular brands