Canon EOS 20D Digital, Service Manual

Page: 96 / 374

1.10 Direct printing from camera and Print ordering (DPOF)
As with all EOS digital cameras from the EOS 10D onward, the EOS 20D is
compatible with PictBridge, CP Direct, Bubble Jet Direct, and DPOF Print Ordering
(Version 1.1). The direct printing features and DPOF features are the same as the
EOS-1D Mark II's. Printer communications can be set to [Normal] or [PTP] with the
menu's [Communication] setting.
When the camera is connected to a CP printer, CP direct will be set regardless of
the PictBridge/CP Direct and Communications settings.
When the camera is connected to a BJ printer compatible with both PictBridge
and Bubble Jet Direct, Bubble Jet Direct will take effect if the Communications
setting is [Normal]. If the Communications setting is [PTP], PictBridge will take
effect. Or, if the BJ printer is compatible with only Bubble Jet Direct, Bubble Jet
Direct will be set regardless of the Communications setting. If the camera is
connected to a non-Canon printer compatible with PictBridge, set the
Communications setting to [PTP] to enable direct printing with PictBridge.
And with the EOS 20D, improved data transmission architecture enabled faster
printing with Canon BJ printers using PictBridge. Especially for image recording
modes whose file size is large, such as Large/Fine, the printing time is drastically
shortened, compared to the conventional data transmission system.
Note 1: Apart from the file size, the printing time varies depending on the size of the paper or the type
of the printer. Therefore, there may be a case that the printing time is not shortened although
the image is Large. With the Middle image and its file size is large, the printing time may be
shortened depending on the printing conditions. For Small image, the printing time is almost
the same with the previous model.
Note 2: This fast data transmission is only effective with the Canon BJ printer compatible with
PictBridge. When printing with Bubble Jet Direct, CP printer or non-Canon printer, the
conventional data transmission system is used.
Note 3: Examples of printing time : When Canon BJ 860i type printer is used, image quality is set to
Large/Fine, and the file size is 1) 5.6 MB or 2) 3.0MB;
Note 3: L-size borderless print : Fast transmission 1) 76 sec., 2) 77 sec. / conventional trans. 1) 191
sec., 2) 77 sec.
Note 3: A4-size borderless print : Fast transmission 1) 218 sec., 2) 218 sec. / Conventional trans. 1)
372 sec., 2) 331 sec.
Technical Information
24
Table 011 Custom Function Changes (2/2)
Deleted Custom Functions
Shutter release without CF card
AF point registration
RAW+JPEG simultaneous
recording
Assist button function
Daylight fill-flash and auto
reduction control of flash exposure
Moved to the menu's [Shoot w/o card] setting.
The Assist button has been discontinued.
Thirteen [Quality] settings can be selected directly with the menu.
The Assist button has been discontinued.
Replaced C.Fn-14's function.