Canon EOS 2000D Page 34 Instruction Manual Download

Page: 34 / 144

You can use a smartphone with Camera Connect installed to view
images stored in the camera and shoot remotely.

The main functions of Camera Connect
are described below.

[Images on camera]



Images stored in the camera can be
viewed.



Images stored in the camera can be
saved on a smartphone.



Operations such as deletion can be
performed on images stored in the
camera.

[Remote live view shooting]



The camera’s Live View image can
be viewed using a smartphone.



You can shoot using remote
operation.

[Location information]



Not supported on this camera.

[Camera settings]



Camera settings can be changed.

Operating the Camera Using a Smartphone

Camera Connect Main Window

Summary of Contents for EOS 2000D

















































































































































Search results

Summary of Contents for EOS 2000D

Reviews:

Related manuals for EOS 2000D

Brands by name

Popular brands

Canon EOS 2000D, Instruction Manual

Search results

Summary of Contents for EOS 2000D

Reviews:

Related manuals for EOS 2000D

Brands by name

Popular brands