Canon EOS 2000D, Instruction Manual

Page: 18 / 144

18
Basic Operation and Settings
4
Select the Wi-Fi function to
connect to.

Press the <
W
> <
X
> or <
Y
> <
Z
>
keys to select an item.
 When the connection settings are not
registered, the setting screen is
displayed.
 When the connection settings are
already registered, the reconnection
screen is displayed.

For further connection settings, see the pages that correspond to the
device to be connected and connection method.

When using the NFC function, see page 20.

Set to [ Enable ] to enable the selection of [ Wi-Fi function ] under the
[
5
3 ] tab.

When the use of electronic devices and wireless devices is
prohibited, such as on board airplanes or in hospitals, set it to
[
Disable ].

When it is set to [ Enable ], you cannot use the camera by connecting
it to Connect Station, a computer, printer, GPS receiver, TV set, or
other device with a cable (p.19).
When you want to prioritize the wireless connection, do not operate the
power switch, Mode Dial, card slot/battery compartment cover, or other
parts. Otherwise, the wireless connection may be terminated.
[Wi-Fi/NFC]
Using the Camera While Wireless Functions Are Active