Canon EOS-1D C Instruction Manual Download

Page: 267 / 420

267

Playing Movies

Function

Playback Description

Exit

Returns to the single-image display.

Play

Pressing <

> toggles between play and stop.

Slow motion

Adjust the slow motion speed by turning the <

> dial. The

slow-motion speed is indicated at the upper right of the
screen.

First frame

Displays the movie’s first frame.

Previous

frame

Each time you press <

>, the previous frame is displayed.

If you hold down <

>, it will rewind the movie.

Next frame

Each time you press <

>, the movie will play frame-by-

frame. If you hold down <

>, it will fast forward the movie.

Last frame

Displays the movie’s last frame.

Edit

Displays the editing screen (p.268).

Playback position

mm’ ss”

Playback time (minutes:seconds with [

Movie play count:

Rec time

] set)

hh:mm:ss:ff

Time code (hours:minutes:seconds:frames with [

Movie play

count: Time code

] set)

Volume

You can adjust the built-in speaker’s (p.266) volume by
turning the <

> dial.

With a fully-charged Battery Pack LP-E4N, the continuous playback time
at 23°C/73°F will be as follows: approx. 4 hr. 50 min.

If you connect the camera to a TV set (p.273, 276) to play back a movie,
adjust the sound volume with the TV set. (Turning the <

> dial will not

adjust the sound volume.)

If you took a still photo while you shot the movie, the movie image
displayed will look still for approx. 1 sec.

COP

Summary of Contents for EOS-1D C





































































































































































































































































































































































































































Search results

Summary of Contents for EOS-1D C

Reviews:

Related manuals for EOS-1D C

Brands by name

Popular brands

Canon EOS-1D C, Instruction Manual

Search results

Summary of Contents for EOS-1D C

Reviews:

Related manuals for EOS-1D C

Brands by name

Popular brands