Canon EOS-1D C, Instruction Manual

Page: 212 / 420

212
3
Menu Function Settings
Silent LV shooting
• Mode 1
The shooting operation noise is quieter than with normal shooting.
Continuous shooting is also possible. At <
o >, the maximum
continuous shooting speed will be approx. 12 shots/sec. At
<
K >, it will be approx. 14 shots/sec.
• Mode 2
When the shutter button is pressed completely, only one shot will
be taken. While you keep holding down the shutter button, the
camera operation will be suspended. Then when you return to the
shutter button’s halfway position, the camera operation will
resume. The shooting noise is thereby minimized. Even if
continuous shooting is set, only a single shot will be taken.
• Disable
Be sure to set this function to [ Disable ] if you use a TS-E lens
(other than those listed in below) for shifting or tilting the lens
or if you use an Extension Tube. Setting it to [ Mode 1 ] or [ Mode 2 ]
will result in incorrect or irregular exposures.
When you press the shutter button completely, the shutter will
sound like it took two shots. However, only one shot will be taken.
Metering timer
You can change how long the exposure setting is displayed (AE lock time).
If you use flash, silent shooting will not be possible regardless of the
[
Silent LV shoot. ] setting.
When using a non-Canon flash unit, set this function to [ Disable ]. The
flash will not fire if it is set to [ Mode 1 ] or [ Mode 2 ].
If the ISO speed is set to ISO 32000 or higher (when the camera’s internal
temperature is low, ISO 20000 or higher), the maximum continuous
shooting speed at <
o
> will be approx. 10 shots/sec.
With the TS-E17mm f/4L or TS-E24mm f/3.5L II lens, you can use [ Mode 1 ] or [ Mode 2 ].
If you select [
z
1: Set Custom WB ], [
z
3: Dust Delete Data ], [ 5 3:
Sensor cleaning ], [ 5 4: Clear all camera settings ], or [ 5 4:
z
Firmware
ver. ], the Live View shooting will end.
COP
Y