Canon EOS-1D C, Instruction Manual

Page: 180 / 420

180
By changing the shutter speed or aperture automatically, the camera brackets
the exposure up to ±3 stops in 1/3-stop increments for three successive shots.
This is called AEB. * AEB stands for Auto Exposure Bracketing.
1
Hold down the <
W
> and
< o > buttons
simultaneously.
(
9
)
X The <
h
> icon and “ 0.0 ” will appear
on the top LCD panel.
2
Set the AEB range.
Turn the <
6
> or <
5
> dial to set
the AEB range.
“ 1.0 ” is the AEB increment, and < N >
is the AEB range.
3
Take the picture.
In the current drive mode, the pictures
will be taken in this sequence:
Standard exposure, decreased
exposure, and increased exposure.
AEB will not be canceled
automatically. To cancel AEB, set the
AEB increment to “
0.0 ”.
h Auto Exposure Bracketing (AEB)
Standard
exposure
Decreased
exposure
Increased
exposure
During AEB shooting, the <
A
> icon in the viewfinder and the <
h
> icon
on the top LCD panel will blink.
If the drive mode is set to <
u
> or <
6
>, press the shutter button three
times for each shot. When < o >, < p >, or < K > is set and you
hold down the shutter button completely, the three bracketed shots will
be taken continuously and the camera will automatically stop shooting.
When <
k
> or <
l
> is set, the three bracketed shots will be taken
continuously after a 10-sec. or 2-sec. delay.
You can set AEB in combination with exposure compensation.
If the AEB range exceeds ±3 stops, the end of the exposure level
indicator will display <
I
/ > or <
J
/ >.
AEB cannot be set for bulb exposures or used with flash.
AEB will be canceled automatically when you set the power switch to
<
2
> or when the flash is ready to fire.
COP
Y