ENG-8
You can use the image stabilizer in AF or MF
mode.
This function provides optimal image stabilization
depending on shooting conditions (such as
shooting still subjects and following shots).
1
Set the STABILIZER switch to ON.
●
●
If you are not going to use the image stabilizer
function, set the switch to OFF.
2
When you press the shutter button halfway,
the Image Stabilizer will start operating.
●
●
Make sure the image in the viewfinder is stable,
then press the shutter button the rest of the way
down to take the picture.
Image Stabilizer
5
●
●
When shooting a still subject, it compensates for
camera shake in all directions.
●
●
It compensates for vertical camera shake during
following shots in a horizontal direction, and
compensates for horizontal camera shake during
following shots in a vertical direction.
●
●
When you use a tripod, the Image Stabilizer
should be turned off to save battery power.
●
●
Even with a monopod, the Image Stabilizer will
be as effective as during hand-held shooting.
However, depending on the shooting environment,
the Image Stabilizer effect may be less effective.
●
●
The image stabilizer function also operates when
the lens is used with an Extension Tube EF12 II.
●
●
If you set the camera’s Custom Function to
change the assigned button to operate the AF,
the Image Stabilizer will operate when you press
the newly assigned AF button.
●
●
The Image Stabilizer cannot compensate for a
blurred shot caused by a subject that moved.
●
●
The Image Stabilizer may not be fully effective
if you shoot from a violently shaking vehicle or
other transportation.
●
●
The Image Stabilizer consumes more power
than normal shooting, resulting in fewer shots
and a shorter movie shooting time.
COP
Y
