ENG-14
Tips on Using the Image Stabilizer
O
O
The Image Stabilizer cannot compensate for a
blurred shot caused by a subject that moved.
O
O
Set the STABILIZER switch to OFF when you
are taking pictures using the Bulb setting (long
exposures). If the STABILIZER switch is set to ON,
the image stabilizer function may introduce errors.
O
O
The Image Stabilizer might not be fully effective in
the following cases:
• You shoot from a violently moving vehicle.
• You move the camera dramatically for a panning
shot in Mode 1.
O
O
The Image Stabilizer consumes more power than
normal shooting, resulting in fewer shots and a
shorter movie shooting time.
O
O
The image stabilizer operates for about two seconds
even when your finger is off the shutter button.
Do not remove the lens while the stabilizer is in
operation. This will cause a malfunction.
O
O
With Extender EF2× II attached to the lens, the
Image Stabilizer will work with the following cameras:
EOS-1D X, EOS-1Ds Mark III, EOS-1Ds Mark II,
EOS-1Ds, EOS-1D Mark IV, EOS-1D Mark III,
EOS-1D Mark II N, EOS-1D Mark II, EOS-1D,
EOS 5D Mark III, 5D Mark II, 5D, 6D, 7D, 70D, 60D,
50D, 40D, 30D, 20D, 20Da, 10D, REBEL T5i/700D,
SL1/100D, T4i/650D, T3i/600D, REBEL T2i/550D,
REBEL T1i/500D, DIGITAL REBEL XSi/450D,
REBEL T5/1200D, REBEL T3/1100D, DIGITAL
REBEL XS/1000D, DIGITAL REBEL XTi/400D
DIGITAL, DIGITAL REBEL XT/350D DIGITAL,
DIGITAL REBEL/300D DIGITAL, D60, D30,
EOS DCS1, DCS3, D2000, D6000, EOS-1V/HS,
EOS-1N/DP/HS/RS, 3, ELAN 7E/ELAN 7/30/33,
ELAN 7NE/ELAN 7N/30V/33V, ELAN II/ELAN
IIE/50/50E, REBEL X/REBEL XS/500, REBEL
G/500N, REBEL 2000/300, REBEL Ti/300V, REBEL
T2/300X, REBEL K2/3000V, IX, IX Lite/IX7, 3000/88,
5000/888
O
O
With the EOS-1V/HS, 3, ELAN 7E/ELAN 7/30/33,
ELAN 7NE/ELAN 7N/30V/33V, ELAN II/ELAN II
E/50/50E, REBEL 2000/300, IX, IX Lite/IX7, and
D30, the Image Stabilizer will not work during self-
timer operation.
O
O
Using a tripod also stabilizes the image.
However, depending on the kind of tripod and
shooting conditions, sometimes it may be better to
turn off the Image Stabilizer function.
O
O
The stabilizer is equally effective for hand-held
photography and photography with a monopod. The
Image Stabilizer effect may be reduced, however,
depending on the shooting environment.
O
O
The Image Stabilizer also operates when the lens is
used with extension tube EF12 II or EF25 II or the
extender EF1.4× III or EF2× III.
O
O
Depending on the camera there may be image
shake, such as after releasing the shutter. However,
this does not affect shooting.
O
O
If you set the camera’s Custom Function to change
the assigned button to operate the AF, the Image
Stabilizer will operate when you press the newly
assigned AF button.
COP
Y
