background image

ENG-4

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: (1) This 

device may not cause harmful interference, and (2) this 

device must accept any interference received, including 

interference that may cause undesired operation.

Do not make any changes or modifications to the equipment 

unless otherwise specified in the instructions. If such 

changes or modifications should be made, you could be 

required to stop operation of the equipment.

This equipment has been tested and found to comply with 

the limits for a class B digital device, pursuant to part 15 

of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful 

interference to radio communications.

However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference 

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and 

receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician 

for help.

CAN ICES-3 (B) / NMB-3 (B)

Summary of Contents for EF 16-35mm f/2.8L II USM















Reviews: