14
Using a USB Connection
1
Connect the supplied power cord into the power
connector on the back of the scanner. (
A
)
2
Connect the power cord into an AC outlet. (
B
)
3
Use the supplied USB cable to connect the scanner to the
computer.
Connect the square plug (Type B) of the USB cable to the
scanner.
Using a SCSI Connection
IMPORTANT
Make sure that the computer is turned OFF before connecting the
SCSI cable. If the cable is connected while the computer is on, the
scanner may not be properly recognized by the computer.
1
Shut down Windows and turn the computer's power OFF.
2
Connect the supplied power cord into the power
connector on the back of the scanner. (
A
)
3
Connect the power cord into an AC outlet. (
B
)
120 V Type
220 - 240 V Type
120 V Type