14.
When all installations are complete, the
Installation completed screen appears.
Click [Exit] to exit the installer.
(Click [Back] to return to the menu screen.)
☞
Continued from front side
Connecting the Scanner to Your PC
Perform the following steps to connect the scanner to your PC with a USB cable.
Caution
❏
Use only the AC adapter and power cord included in this package.
❏
Connect the DR-3010C to your computer while the DR-3010C is turned OFF.
Turning the Scanner Power ON
(Scanner Recognition)
When you turn the scanner connected to the PC ON, the plug-and-play function
recognizes the scanner, and the device driver is automatically installed.
The scanner and computer are connected.
Next, turn the scanner ON and Windows recognizes it.
(
☞
STEP5)
❏
Be sure to log on with administrator privileges when logging on to Windows.
Caution
The scanner is now correctly recognized by your computer.
Next, check whether you can actually scan.
(
☞
STEP6)
●
The initial settings for the functions assigned to each job number are as follows:
Job Number 1: Scan To Folder (Saves the scanned image)
Job Number 2: Scan To Mailer (Attaches the scanned image to an e-mail)
●
The function assigned to each job number can be changed.
For details, see "Scanning with the Job Function," in the User Manual.
●
Scanned image files are saved in the [My Pictures] folder in [My Documents].
(Default)
●
Image files that are saved according to the default settings are saved as PDF
files with a 17-digit file name. This file name indicates the date and time that the
image was saved.
●
You can change the scan settings with the Job Function by using the Job
Registration Tool registered in the Programs menu.
The setup of the DR-3010C is now complete.
●
This completes the setup of the DR-3010C. Before you start using the DR-3010C,
be sure to thoroughly read the DR-3010C User Manual and Reference Guide.
For information on using CapturePerfect 3.0, refer to the operation guide registered
in the Programs menu.
●
This completes the software installation.
Next, you need to connect the scanner to your computer.
(
☞
STEP4)
4.
Click [Install].
The DR-3010C driver installation is executed.
During the DR-3010C driver installation, the
DR-3010C driver and the Job Registration
Tool are installed.
5.
Click [Next].
6.
Read the software license agreement, and
click [Yes] if you consent to the conditions of
the software.
Installation of the scanner driver starts.
7.
Click [Finish] to complete the installation of
DR-3010C driver.
Next, the installation wizard for
CapturePerfect 3.0 appears.
8.
Click [Next].
9.
Read the software license agreement, and
click [Yes] if you consent to the conditions of
the software.
10.
Check the destination folder and click [Next].
Installation of CapturePerfect 3.0 starts.
11.
Click [Finish] to complete the installation of
CapturePerfect 3.0.
Next, the User Manual installation wizard
appears.
12.
Click [Next].
Installation of the User Manual starts.
13.
Click [Finish] to complete the installation of
the User Manual.
2.
Confirm the feed selection lever is set to .
Be careful, because when the feed selection lever is set to (bypass mode),
document pages feed without being separated. For details on the feed selection
lever, refer to the DR-3010C User Manual.
3.
Thoroughly fan the pages of your documents, and shift the pages so that the
top edge of the first page is the bottommost page.
4.
Place the document with the reverse side facing you, and the top of the
document so it is fed through the scanner first. Adjust the document guides to
fit the width of the document.
5.
Confirm the job number "1" is displayed on the display panel (
1
), and then
press the Start key (
2
).
"Monitor for DR-3010C" is displayed at the bottom right of the screen and
scanning starts.
6.
When "Sending complete" is displayed on the "Monitor for DR-3010C", this
indicates that scanning has ended. Click "Close" to close the "Monitor for DR-
3010C".
1.
Make sure that the scanner and computer are connected.
2.
Turn the power switch of the scanner to " "(ON) or "AUTO".
ON: The power of the scanner is turned ON, and the power indicator is lit blue.
AUTO: The power of the scanner is turned ON/OFF when the power of the
computer is turned ON/OFF.
3.
Turn ON your computer.
4.
Windows automatically recognizes the DR-3010C as new hardware.
Scanning
1.
Open the document eject tray.
When you have finished installing the software and the scanner has been recognized,
you can load and scan a document.
The DR-3010C can perform scanning by simply pressing the Start key on the
operation panel. Follow the steps below to load a document, press the Start key, and
confirm that your document is scanned properly.
STEP 4
STEP 5
STEP 6
Memo
1.
Check that the power switch is in the " " (OFF) position (
1
).
If the power switch is in the " " (ON) or "AUTO" position, switch it to " " (OFF).
2.
Connect the power cord to the AC adapter (
2
).
3.
Plug the AC adapter into the connector located on the back side of the machine
(
3
).
4.
Plug the power cord into the power outlet (
4
).
5.
Connect the USB cable included with the scanner to the scanner and your PC.
(Windows XP)
(Windows Vista)
(Windows XP)
(Windows Vista)
Memo
●
In Windows Vista, installation is complete even if the "Click here for status." help
bubble does not appear.
Click "Click here for status." to display the installation progress.
●
When installation is finished, a message appears in the help bubble.
