background image

8

CAUTION

Do not install the scanner on a surface that is unstable, tilted, or in 
an area subject to excessive vibrations, as this may cause the 
scanner to fall, resulting in personal injury or damage to the 
scanner.

Do not block the ventilation openings. Doing so may cause the 
scanner to overheat, creating a risk of fire.

Never place small metal objects, such as staples, paper clips, or 
jewelry on the scanner. These items may fall into the scanner, and 
cause a fire or electric shock. If such objects ever fall inside the 
scanner, immediately turn the power switch OFF, and disconnect 
the power plug from the power outlet. Then, contact your local 
authorized Canon dealer or service representative to have the unit 
serviced.

Do not locate the scanner in a humid or dusty location. Doing so 
may cause a fire or electric shock.

Do not place objects on top of the scanner. Such objects may tip or 
fall over, resulting in personal injury.

Do not use the scanner with a power supply voltage other than 100 
VAC. Doing so may result in a fire or electric shock.

When unplugging the power cord, grasp it firmly by its plug. Do not 
pull directly on the power cord, as this may damage or expose the 
cord’s internal wiring, resulting in a fire or electric shock.

Leave sufficient space around the power plug so that it can be 
unplugged easily. If objects are placed around the power plug, you 
will be unable to unplug it in an emergency.

Do not allow water or flammable substances (alcohol, benzene, 
paint thinner, etc.) to spill into the scanner, as this may result in a 
fire or electric shock.

Turn OFF the power switch for safety when not using the scanner 
for a long period of time, such as overnight. Also, turn OFF the 
power switch, and disconnect the AC adapter from the scanner and 
disconnect the power cord from the power outlet for safety when the 
machine will not be used for an extended period of time, such as 
during consecutive holidays.

Do not wear loose clothing or jewelry that may get caught in the 
scanner while you are using it. This may result in personal injury. Be 
extra careful of neckties and long hair. If anything becomes caught 
in the scanner, immediately disconnect the power cord to stop the 
scanner.

Be careful when placing paper in the scanner and when removing 
jammed paper. It is possible to cut your hand on the edge of a sheet 
of paper.

Open and close the feeder carefully and slowly. Failure to do so 
may result in malfunction or personal injury.

Take care to avoid pinching your hands when closing the feeder. 
Failure to do so may result in personal injury.

Do not press down hard on the feeder. Doing so may result in 
damage to the glass, malfunction, or personal injury.

Never place any object other than documents to be scanned onto 
the feeder’s feed and eject areas. Doing so may result in 
malfunction or personal injury.

When using the scanner in cold temperatures, wait a few moments 
after turning the power switch ON. Failure to do so may result in a 
condensation error.

Disposal

When disposing of the scanner and AC adapter, make sure to follow 
the local ordinances and laws or consult with your local authorized 
Canon dealer.

Summary of Contents for DR-2020U - imageFORMULA - Document Scanner









































Reviews: