OSD Menu
63
Sub Menu
Setting Options (Bold: factory default)
Shape
Box
Brackets
Enclosure
Sets the area shape of the safety zone marker.
[Box]:
[Brackets]:
[Enclosure]:
Line Width
Thick
Normal
Thin
Sets the width of the safety zone marker line.
Line Color
White
, Red, Green,
Blue, Yellow, Cyan,
Magenta
Sets the color of the safety zone marker line.
Line Brightness
High
Low
Sets the brightness of the safety zone marker line.
H Position
-65 to 65 (
0
)
Adjusts the marker horizontal position with the set aspect and size.
V Position
-35 to 35 (
0
)
Adjusts the marker vertical position with the set aspect and size.
Area Marker
1
[Area Marker] is used to check a specific area using a rectangular box.
Enable
On,
Off
Switches the area marker On, Off.
H Position
0 to 4086 (
240
)
Sets the start position (x-coordinate) to draw the rectangle. (in increments
of 2)
V Position
0 to 2150 (
120
)
Sets the start position (y-coordinate) to draw the rectangle. (in increments
of 2)
Width (dot)
10 to 4096 (
240
)
Sets the width of the rectangle. (in increments of 2)
