Canon DP-V2411 Instruction Manual Download Page 13

Page: 13 / 119

Installation/Connection

Removing/attaching the stand

The stand can be removed when storing the display on a rack or display shelf.

CAUTION

•

Use a flat, clear surface when attaching/detaching the stands.

•

The display can tip over if the stand has not been attached.

•

Avoid touching the screen during this step as it may damage it.

Detaching

1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the

display.

2 Remove the mounting screws (x 2) from the left and right stands.

•

Do not lose the removed screws. Do not use these screws for other purposes.

Attaching

1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the

display.

2 Align the position of the stand and screw hole on the video display.

•

Alight the convex part of the stand and concave part of the video display.

3 Fix the left and right stands using the mounting screws (x 2).

Rear

Screen side

Stand

Stand mounting screw hole

Mounting screw

Concave part

Convex
part

Summary of Contents for DP-V2411
























































































































Search results

Summary of Contents for DP-V2411

Reviews:

Related manuals for DP-V2411

Brands by name

Popular brands

Canon DP-V2411, Instruction Manual

Search results

Summary of Contents for DP-V2411

Reviews:

Related manuals for DP-V2411

Brands by name

Popular brands