Changing Shooting Functions
145
Changing the IS-Mode Settings
●
Select [IS Mode], then press the
qr
buttons to
select an option.
●
[Continuous]: The image stabilization is
always on. You can confirm the result directly
on the display, which makes it easier to check
the composition or focus of the subject.
●
[Shoot Only]: The image stabilization is only
on in the moment of shooting.
●
[Panning]: The image stabilization only works
for the effect of up and down motion. This
option is recommended for shooting objects
moving horizontally.
Registering Functions to the
c
Button
●
Select [Set
c
button], then press the
m
button.
●
Press the
opqr
buttons or turn the
Â
dial
to select the functions to register, then press
the
m
button.
●
Pressing the
c
button will call up the
registered function.
•
If camera shake is too strong, fix the camera to a tripod. However, it is
recommended to set IS Mode to [Off] when the camera is fixed to a tripod.
•
When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
•
Press
if you want to cancel a function.
•
When this
symbol is shown on the bottom right of an icon, the
function cannot be used in the current shooting mode or function setting.
•
In
, each press of the
c
button records white balance data
(p. 71)
,
and the white balance settings also change to
.
•
In
, each time you press the
c
button, the shutter sound’s
clip
(p. 147)
in the
5
tab will play. Use this when you want to draw the
attention of the subject before shooting.
