User Manual: LLS-1
ODB-118-0070ENG
Page 14 of 36
14-01-2022
2.3 Intended purpose and patient population
Intended Purpose:
The LLS-1 stand is intended to hold three Canon detectors
in order to be able to make a Long-Length X-ray image in a
single shot, and to support the patient retaining a stable
vertical position.
Variants:
The LLS-1 is available
in two versions
.
•
CXDI 410C Wireless (42x43cm).
•
CXDI-710C Wireless (35x43cm).
Accessory:
There are no accessories
Intended indication:
General Radiography.
For taking X-rays images where the Field of View (FoV) is
greater than the FoV of one detector and it
’s important that
there is no movement while the X-ray is being taken.
Making and merging of separately taken X-rays images is
no longer necessary because the image can be taken in
one shot.
If the patient moves while recording the image, "moving
blur" will be introduced into the image. The LLS-1 provides
a stable position for the patient during an X-ray procedure
for patient picture improvement.
Intended Users:
Trained professional radiographers.
Patient Population:
There are no restrictions in patient population.
Duration:
Transient. Even when the device is used more than once
on the same patient, the total duration will not exceed
transient use.
Intended environment:
Dedicated X-ray room, in medical institutions.
Non-invase device:
The device is non-invasive by its nature.
Active medical device
: The device is an active medical device.
