Canon DCD CAMCORDER Instruction Manual Download

Page: 72 / 83

Maintenance/Others

Storage

If you do not intend to use the camcorder for a long time, store it in a place free of dust,
in low humidity, and at temperatures not higher than 30

Cleaning

Camcorder Body

Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloth
or volatile solvents such as paint thinner.

Pick Up Lens

Remove any dust or dirt particles using a non-aerosol type blower brush. Never touch
the pick up lens directly to clean it.

Lens and Viewfinder

If the lens surface is dirty, the autofocus may not work properly.

Remove any dust or dirt particles using a non-aerosol type blower brush.

Use a clean, soft lens-cleaning cloth to gently wipe the lens or viewfinder. Never use
tissue paper.

LCD Screen

Clean the LCD screen using a clean, soft lens-cleaning cloth.

Condensation may form on the surface of the screen when the temperature changes
suddenly. Wipe it with a soft dry cloth.

Condensation

Moving the camcorder rapidly between hot and cold temperatures may cause
condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if
condensation is detected. Continued use may damage the camcorder.

Summary of Contents for DCD CAMCORDER




















































































Search results

Summary of Contents for DCD CAMCORDER

Reviews:

Related manuals for DCD CAMCORDER

Brands by name

Popular brands

Canon DCD CAMCORDER, Instruction Manual

Search results

Summary of Contents for DCD CAMCORDER

Reviews:

Related manuals for DCD CAMCORDER

Brands by name

Popular brands