Canon DADF-P1, Service Manual

Page: 47 / 90

Chapter 3
3-7
F-3-38
2) Remove the pickup roller [1].
3) Remove the E-ring [2], and then remove the separation roller [3].
F-3-39
3.4.3 Separation Plate/Separation Pad
3.4.3.1 Removing the Separation Pad
0010-3989
1) Open the feeder cover.
2) Release the two hooks [1], and then remove the separation pad [2].
F-3-40
3.4.4 Upper Registration Roller
3.4.4.1 Removing the Front Cover
0010-6359
1) Open the feeder cover [1], and then remove the screw [2].
F-3-41
2) Remove the two screws [3], and then detach the front cover [4].
F-3-42
3.4.4.2 Removing the Feeder Cover
0010-6360
1) Remove the screw [1] and positioning pin [2], and then detach the feeder
cover [3].
F-3-43
3.4.4.3 Removing the Upper Registration Roller
0010-3993
1) Release the two hooks [1], and then detach the inner cover [2] of the feeder
cover.
F-3-44
2) Slide the shaft [1] in the direction of the arrow, and then remove the upper
registration roller [2].
Do not remove the upper registration roller shaft holder [3] because it
was factory-adjusted.
[2] [1]
[2]
[1] [3]
[2] [1]
[1]
[2]
[3]
[4]
[3]
[2]
[1]
[1] [2] [1]