Canon CXDI-1, Operation Manual, Page: 19 / 170

Continued on the following page >>
2. Taking an Image
– 11 –
2.1 Entering Patient Data
Patient data can be entered from the operation unit, a magnetic card reader, or a database file.
In addition,
2.1 Entering Patient Data (
→
page 11) and 2.2 Selecting and Changing the
Exposure Mode (
→
page 15) may be performed in any order.
2.1.1 Entering Data from the Operation Panel
1
Display the software keyboard.
Touch [PATIENT] on the exposure screen.
Software Keyboard (Alphabet)
2
Enter the name. (Optional depending on the setting)
Touch the frame to display the cursor and enter the name in 63 or fewer alphanumeric
characters.
3
Enter the ID. (Required)
Touch the frame to display the cursor and enter the ID in 32 or fewer alphanumeric
characters.
4
Enter the accession number. (Optional depending on the setting)
Touch the frame to display the cursor and enter the accession number in 16 or fewer
alphanumeric characters.
(Depending on the installation setup by a service engineer, it may not be possible to enter
the accession number.)
5
Select patient’s sex. (Optional depending on the setting)
Touch [MALE] , [FEMALE] or [OTHER] .
Switching the software keyboard input
Touch [NUM] for numerical input, or [ALPHA] for alphabet input. Also, touch [Caps]
to select between upper case and lower case alphabet letters.