Temple of the Emerald, Thai : Assembly Instructions
See the key points on making on p.1 in the
assembly manual and assemble octagonal
pillars (5 types). For the 4 “pillars 50” on the
center part of the sides of the “floor”, insert
them (to the rear of the “pasting margin” of
the floor) and glue. Check the tilting and how
they stand, and glue the pillars (top and bottom)
to the specified locations in the following order.
4 pillars 8 pillars 4 pillars 8 pillars 20 pillars
Inserting type
No decoration
Top
Exterior
building
Exterior
building
Exterior
building
Fold the pillar ornament (43) into 3
sides and glue to the specified locations
on the upper part of the pillars.
Glue the ornaments (43) to the side of
the pillars facing outside of the building.
Location to glue the roof ornament parts
(the same for the other side)
Insert into the holes
on the “floor”.
Make the parts (37, 38 and
39) after holding the part (35),
and gluing on to the roof.
Fold along
the center line
Glue the
rear sides
Roof
Finished
Nameplate
