PAGE03
*Making sure the parts face the right way, and glue the front and back covers to the base.
Hook the loops on the swing over the tree branch.
Attach the front and back covers.
Wait for the glue to dry, open the card 90°and check that the bears pop out.
You're done!
Front cover
Base A
Base B
Back cover
How the tree branch and swing should look
Pop-up card (Swings) : Assembly Instructions
Upper part
Lower part
Close over the base and attach glue tabs 8' on parts A and B to the
back of the tree.
View from the side:
partially close the card to attach.
Close over the base and attach glue tabs 9' on parts C to the back of bear A.
*If you tuck her hands behind the swing and her body in front, she will look like she's really sitting on the swing.
Glue bear B to the swing.
View from the side:
partially close the card to attach.
Parts A, B and C should be parallel to
base B when attached.
