Cut out the parts
Glue
Glue
Glue
Once the glue is completely dry,
cut out the part by following
the scissors line on the front.
For other parts, simply cut them out
along the scissors lines.
Assembling the propeller
Fold the parts you have cut out.
Attach the propeller parts you have curved
into a ring shape.
Fold along the fold line and
glue together at the back.
Assembling the shaft
Put the part face up on the edge of a table
and roll it while applying pressure,
to give the part a curve.
Fold the edge to make a triangular prism,
and then roll it up into a stick
(about 5mm in diameter)
.
Finally, glue down the end
so that it doesn't get unraveled.
Assembling the paper copter
Paper Copter /
Assembly Instructions
