Canon CREATIVE PARK Mobile Sky and Sea Assembly Instructions Manual Download Page 5

Page: 5 / 6

Mobile: Sky and Sea -Assembly Instructions-

Cut out the parts roughly,

and use a ruler and exhausted pen

to score along the lines.

Add a curve.

Add glue

Fold about 40cm of string in half and align the ends,

then make a knot about 1cm from the end.

Thread the ends through the loop as shown by the arrow.

Put glue on the glue spots and fins indicated

and attach the left and right sides together.

Turn over and curve.

Put glue on the back of the

lower half of the eye too.

Cut a slot.
Make a valley fold.

Reverse side

ers

e s

ide

ers

e s

ide

Summary of Contents for CREATIVE PARK Mobile Sky and Sea

Page 2: ...ooks on top and leave to dry for a few hours Then cut out the part Fold about 60cm of string in half and align the ends then make a knot about 1cm from the end Thread the ends through the loop as shown by the arrow Turn over and put glue on the side Add glue Add glue Add glue Add glue Mobile Sky and Sea Assembly Instructions ...

Page 5: ...of string in half and align the ends then make a knot about 1cm from the end Thread the ends through the loop as shown by the arrow Put glue on the glue spots and fins indicated and attach the left and right sides together Turn over and curve Put glue on the back of the lower half of the eye too Cut a slot Make a valley fold Reverse side Reverse side Reverse side ...

Page 6: ...to either side of the sky arm Attach the fish ornaments to the sea arm Make a loop near the knot and pass the sea arm through it Example of completed mobile Refer to the example and adjust the length of the string Make a loop near the knot and pass the bird ornament through it Make a loop near the knot and pass the fish ornament through it ...