3 System Connections
Attaching the Zoom Unit
24
Attaching the Zoom Unit to the Camera Head
1.
Turn the camera rotator clockwise so the hole for the zoom unit shaft is on top.
2.
Insert the zoom unit shaft into the camera rotator.
Attach the zoom unit so the flat surface is facing the main capture camera side, regardless of the attachment
position.
Lenses Other than the EF100-400mm
Insert the zoom unit shaft into the camera rotator’s shaft hole
from the camera rotator’s camera side.
EF100-400mm Lens
Insert the zoom unit shaft into the camera rotator’s notch from
the subject side of the camera rotator.
3.
Attach an hex head bolt (M6) so the zoom unit does not
move inadvertently. Use a 4 mm (0.16 in.) hex wrench to
screw the bolt only partially.
Final situation after the procedure
Lenses other than the EF100-400mm
EF100-400mm lens
