Canon ColorWave 3800, Operation Manual

Page: 71 / 358

Setting Description
[Media selection policy] • Select [Automatic next larger] to allow the printer to use a me-
dia roll larger than the size of the print, when the exact size is
not available.
• Select [Automatic exact fit] to only allow the printer to use a
media roll that has the exact media size of the print. When the
media roll with the exact media size is not available a media re-
quest appears.
[Cut method] • Select [Standard] to cut the print at a standard media size (DIN,
ANSI etc.).
• Select [Synchro] to cut the print at the end of the image.
• Select [Custom] (numeric) to cut the print at a specific length.
[Custom print length] Enter the cut length of your print job.
[Add leading strip] When you enter a value, the printer adds a blank strip of the speci-
fied length at the top of the output.
[Add trailing strip] When you enter a value, the printer adds a blank strip of the speci-
fied length at the bottom of the output.
Overview of the [Print job defaults] - [Layout] settings
Open the [Preferences] - [Print job defaults] tab. Go to [Layout] and click edit in the upper right
hand corner.
Setting Description
[Scale] • Select [Automatic scale to the media size] to scale the image to
the media.
• Select [Automatic scale down when image is larger than media]
to scale down the image one format smaller than the original.
• Select [Custom scale factor] to enter your own scale percent-
age, with 100 percent as no scaling.
[Mirror] Select [On] to mirror the image along the vertical axis - the media
transport direction.
[Rotation] Select any option to rotate the image counterclockwise.
When you want to print more productively, select [Long edge
first]. You can print more productively due to less media transport.
Select [Automatic media saving] to use the media in the most effi-
cient way.
For more information, see
Set the rotation mode
on page 150 .
[Alignment] Select any of the options to define where to align the image on the
media.
For more information, see
Set the alignment mode
on page 151 .
[Horizontal shift] Define how much you want the image to shift horizontally in the
chosen alignment position.
[Vertical shift] Define how much you want the image to shift vertically in the
chosen alignment position.
Set the print job default settings
Chapter 3 - Define your workflow with WebTools Express 71